View HSD100IXN1-A_7307410.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 1/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. to : date : may, 27, 2010 customer acceptance specification 10 color tft-lcd module model: hsd100ixn1 -a** P? accepted by: signature date proposed by: technical service division signature date note: 1. please contact hannstar display corp. before des igning your product based on this module specification. 2. the information contained herein is presented me rely to indicate the characteristics and performanc e of our products. no responsibility is assumed by ha nnstar for any intellectual property claims or othe r problems that may result from application based on the module described herein. www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 2/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. record of revisions rev. date sub-model description of change 1.0 may, 27, 2010 a** formal product specification was first released www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 3/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. contents 1.0 general description p.4 2.0 absolute maximum ratings . p.5 3.0 optical characteristics. . p.6 4.0 block diagram p.10 5.0 interface pin connection p.11 6.0 electrical characteristics p.13 7.0 reliability test items p.21 8.0 outline dimension p.22 9.0 lot mark ... p.23 10.0 package specification p.24 11.0 general precaution p.25 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 4/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 1.0 general description 1.1 introduction hannstar display model HSD100IXN1-A** is a color ac tive matrix thin film transistor (tft) liquid crystal display (lcd) that uses amorphous silicon tft as a switching device. this model is composed of a tft l cd panel, a driving circuit and a back light system. this tft lcd has a 10 (4:3 ) inch diagonally measured active display area with xga (1024 horizontal by 76 8 vertical pixel) resolution. 1.2 features 10 (4:3 diagonal) inch configuration 6 bits driver with 1channel ttl interface rohs and halogen-free compliance 1.3 applications digital photo frame multimedia applications and others av system 1.4 general information item specification unit outline dimension 215.5 x 166.5 x 5.0 (typ.) mm display area 202.752 (h) x 152.064 (v) mm number of pixel 1024 rgb (h) x 768(v) pixels pixel pitch 0.198(h) x 0.198(v) mm pixel arrangement rgb vertical stripe display mode normally white surface treatment antiglare, hard-coating (3h) weight 330 (typ.) g back-light single led (side-light type) logic system 0.75 (max.) w power consumption b/l system 2.64 (max.) w 1.5 mechanical information item min. typ. max. unit horizontal (h) 215.2 215.5 215.8 mm vertical (v) 166.2 166.5 166.8 mm module size depth (d) 5.0 5.3 mm weight 330 g www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 5/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 2.0 absolute maximum ratings 2.1 electrical absolute rating 2.1.1 tft lcd module item symbol min. max. unit note digital supply voltage vcc -0.5 5 v analog supply voltage avdd -0.5 13.5 v v1~v7 0.4avdd avdd+0.3 v supply voltage v8~v14 -0.3 0.6avdd v digital input voltage - -0.5 vcc+0.5 v 2.1.2 back-light unit item symbol typ. max. unit note led current i l 220 ma (1) (2)(3) led voltage v l 10.5 v (1) (2)(3) note (1) permanent damage may occur to the lcd modu le if beyond this specification. functional operation should be restricted to th e conditions described under normal operating conditions. (2) ta =252 (3) test condition: led current 220 ma. the led lif etime could be decreased if operating i l is larger than 220ma. 2.2 environment absolute rating item symbol min. max. unit note operating temperature t opa -20 70 storage temperature t stg -30 80 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 6/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 3.0 optical characteristics 3.1 optical specification item symbol condition min. typ. max. unit note contrast cr 480 600 (1)(2) rising t r 2.4 4.8 response time falling t f 5.6 11.2 msec (1)(3) white luminance (center) y l 200 250 cd/m 2 (1)(4) (i l =220ma) w x 0.260 0.310 0.360 color chromaticity (cie1931) white w y =0 normal viewing angle 0.280 0.330 0.380 l 65 75 hor. r 65 75 u 50 60 viewing angle ver. d cr>10 60 70 (1)(4) brightness uniformity b uni =0 70 - % (5) optima view direction 6 o clock (6) 3.2 measuring condition measuring surrounding dark room led current i l 220ma ambient temperature 252 o c 15min. warm-up time. www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 7/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 3.3 measuring equipment fpm520 of westar display technologies, inc., which utilized sr-3 for chromaticity and bm-5a for other optical characteristics. measuring spot size 20 ~ 21 mm note (1) definition of viewing angle: note (2) definition of contrast ratio (cr) : measured at the center point of panel luminance with all pixels white cr = luminance with all pixels black l r u d =0 o =180 o 12 oclock =90 o 6 oclock =270 o www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 8/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. note (3) definition of response time : sum of t r and t f note (4) definition of optical measurement setup time optical response white(tft off) black (tft on) white(tft off) 100% 90% 10% 0% t r t f www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 9/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. note (5) definition of brightness uniformity 16.67% 50.00% 83.33% 16.67% 50.00% 83.33% y2 y3 y4 y9 y1 y5 y8 y7 y6 luminance uniformity = 100% note (6) rubbing direction (the different rubbing direction will cause the different optima view direction. (min luminance of 9 points) (max luminance of 9 points) www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 10/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 4.0 block diagram 4.1 tft lcd module: 4.2 pixel format 1,1 1,1024 768, 1024 lcd display area 2,1 1,2 1,3 1,4 768 lines 1024 pixel (3072 dots) 768,1 r r r b g 1 pixel g/d s/d s/d s/d x-pcb cn1 cn2 led 1024(rgb)x768 cn3 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 11/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 5.0 interface pin connection 5.1 tft lcd module cn1 (input signal): 30pin, 0.5mm pitch, 196033-30041-3 (p-two or equivalent) pin no. signal description 1 pol polarity setting 2 stvd vertical line start pulse i/o signal 3 oe123r vertical line output enable signal 4 g-clkr vertical line clock 5 stvu vertical line start pulse i/o signal 6 gnd digital power ground 7 edgsel define clock edge select input, default edgsel=l. edgsel=l latch data by rising edge of clock edgsel=h latch data by rising and falling edges of clock 8 vcc digital voltage input 9 v9 gamma voltage input 10 vgl gate off voltage 11 v2 gamma voltage input 12 vgh gate on voltage 13 v6 gamma voltage input 14 udc shift up/down control signal udc = "h", up shift: stvd (input) g1 ~ g600 stvu (output) udc= "l", down shift: stvu (input) g600~g1 stvd (output) 15 vcom common voltage 16 agnd analog power ground 17 avdd analog voltage input 18 v14 gamma voltage input 19 v11 gamma voltage input 20 v8 gamma voltage input 21 v5 gamma voltage input 22 v3 gamma voltage input 23 gnd digital power ground 24 r5 red data bus input (msb) 25 r4 red data bus input 26 r3 red data bus input 27 r2 red data bus input 28 r1 red data bus input 29 r0 red data bus input (lsb) 30 gnd digital power ground www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 12/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. cn2 (input signal): 30pin, 0.5mm pitch,196033-30041-3 (p-two or equivalent) pin no. signal description 1 gnd digital power ground 2 g5 green data bus input (msb) 3 g4 green data bus input 4 g3 green data bus input 5 g2 green data bus input 6 g1 green data bus input 7 g0 green data bus input (lsb) 8 dio2_cof3 horizontal line start pulse i/o signal (sthr) 9 rev data invert signal 10 gnd digital power ground 11 clk pixel clock 12 vcc digital voltage input 13 dio1_cof1 horizontal line start pulse i/o signal (sthl) 14 ld polarity latch and re-flash new data to outpu t 15 b5 blue data bus input (msb) 16 b4 blue data bus input 17 b3 blue data bus input 18 b2 blue data bus input 19 b1 blue data bus input 20 b0 blue data bus input (lsb) 21 lrc select left or right shift, normally pulled high. shl=1: dio1 out1,2,3 out4,5,6 out1198,1199,1200 = dio2 shl=0: dio1= out1,2,3 ? out4,5,6 ? out1198,1199,1200 ? dio2 22 v1 gamma voltage input 23 v4 gamma voltage input 24 v7 gamma voltage input 25 v10 gamma voltage input 26 v12 gamma voltage input 27 v13 gamma voltage input 28 avdd analog voltage input 29 agnd analog power ground 30 vcom common voltage 5.2 back-light unit cn3 led power source ( bhsr-02vs-1 ) or equivalent mating connector: ( sbht-002t-p0.5 ) or equivalent terminal no. symbol function 1 v l led power supply (high voltage) 2 g l led power supply (low voltage) www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 13/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.0 electrical characteristics 6.1 tft lcd module item symbol min. typ. max. unit note vcc 3.0 3.3 3.6 v note (2), note (3) v gh 16.55 17 17.45 v note (2), note (3) v gl -7.35 -7 -6.65 v note (2), note (3) supply voltage av dd 9.22 9.48 9.75 v note (2), note (3) vcom v comin - 3.19 - v v ih 0.7 vcc - vcc v note (1) input signal voltage v il 0 - 0.3 vcc v i cc - 8.3 - ma vcc = 3.3v (black) i add - 70 - ma av dd = 9.5 v (black) i gh - 0.3 - ma v gh = 17 v curr ent of power supply i gl - 0.6 - ma v gl = -7 v input level of v1~v5 vx avdd/2 - avdd-0.1 v input level of v6~v10 vx 0.1 - avdd/2 v note (1): hsync, vsync, de, digital data note (2): be sure to apply the power voltage as the power sequence spec. note (3): dgnd=agnd=0v www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 14/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.2 back-light unit the back-light system is an edge-lighting type with 33 led. the characteristics of the led are shown in the fol lowing tables. item symbol min. typ. max. unit note led current i l 220 ma (2) led voltage v l 10.5 v operating led life time hr 20000 hour (1)(2) note (1) led life time (hr) can be defined as the t ime in which it continues to operate under the condition: ta=253 o c, typical il value indicated in the above table until the brightness becomes less t han 50%. note (2) the led life time is defined as the modu le brightness decrease to 50% original brightness at ta=25 and il=220ma. the led lifetime could be decreased if operating il is larger than 2 20ma. the constant current driving method is suggested. led light bar circuit lcd module white ( ground) black a power supply 1 2 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 15/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. note (3) suggested schematic of led back-light driv er suggested schematic of led back-light driver www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 16/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.3 ac characteristics source driver timing item symbol min. typ. max. unit note clk frequency fclk - 56 60 mhz - clk pulse width tcw 6 - - ns - data set-up time tsu 4 - - ns - data hold time thd 2 - - ns - propagation delay of dio2/1 tphl 6 10 15 ns cl=25pf ( output ) time that the last data to ld tld 1 - - tcph - pulse width of ld twld 2 - - tcph - time that ld to dio1/2 tlds 5 - - tcph - pol set-up time tpsu 6 - - ns pol to ld pol hold time tphd 6 ns pol to ld gate driver timing item symbol min. typ. max. unit note cpv period tcpv 5 - - us - cpv pulse width tcpvh, tcpvl 2.5 - - us 50% duty cycle oe pulse width twoe 1 - - us - data setup time tsu 200 - - ns - data hold time thd 300 - - ns - www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 17/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.4 timing diagram of interface signal source driver timing tphl tphl 70% 30% dio1/2 (output) data,rev clk 70% tcw tcw tsu first data second data last data dio1/2 (input) 70% 70% thd tsu tcph 70% 30% 30% 70% 70% 70% thd 70% 70% ld pol tpsu tphd 70% 70% 70% ld 70% clk dio1/2 (input) 70% tld 70% 70% twld tlds www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 18/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. gate driver timing cpv stvu tcpv tcph tcpl tsu thd oe twoe 50% 50% 50% www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 19/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.5 power on / off sequence item min. typ. max. unit remark tp1 0.5 -- 10 msec tp2 0 -- 50 msec tp3 0 -- 50 msec tp4 500 -- -- msec tp5 200 -- -- msec tp6 200 -- -- msec power on sequence: vcc-> avdd -> vgl -> vgh -> data -> b/l power off sequence: b/l-> data -> vgh -> vgl -> avd d -> vcc notes: data include r0~r7, g0~g7, b0~b7, hsd, vsd, dclk, shlr, updn , de mode, rstb, stbyb, shlr, updn, dith t 10% 90% level define power supply signal backlight (recommended ) 0v 0v power on power off 0.9v dd 0.1v dd 0.9v dd 0.1v dd 0.1v dd 0.6v 0.6v 50% 50% tp1 tp2 tp3 tp4 tp5 tp6 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 20/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.6 gamma circuit *suggested gamma circuit (avdd=9.5v). www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 21/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 7.0 reliability test items no. item conditions remark 1 high temperature storage ta=+80 o c, 240hrs 2 low temperature storage ta=-30 o c, 240hrs 3 high temperature operation ta=+70 o c, 240hrs 4 low temperature operation ta=-20 o c, 240hrs 5 high temperature and high humidity (operation) ta=+60 o c, 90%rh, 240hrs 6 thermal cycling test (non operation) -30 o c(30min) +80 o c(30min), 200cycles 7 electrostatic discharge 200v,200pf(0 ) 1 time/each terminal 8 vibration 1.random: 1.04grms, 5~500hz, x/y/z, 30min/each direction 2. sine: freq. range: 8~33.3hz stoke: 1.3mm sweep: 2.9g, 33.3~400hz x/z: 2hr, y: 4hr, cyc: 15min 9 shock 100g, 6ms, x, y, z 3 time for each direction jis c7021, a-10 (condition a) 10 vibration (with carton) random: 0.015g^2/hz, 5~200hz -6db/octave, 200~400hz xyz each direction: 2hr 11 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces jis z0202 note: there is no display function ng issue occurr ed, all the cosmetic specification is judged before the reliability stress. www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 22/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 8.0 outline dimension 8.1 outline dimension note : general tolerance : +/- 0.3mm u u nit : mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 23/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 9.0 lot mark 9.1 lot mark 10 11 12 13 14 15 code 1,2,3,4,5,6: hannstar internal flow control co de. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number. note (1) production year: code 8 is defined by the last number of the year, for example year 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 mark 6 7 8 9 0 1 2 3 4 5 note (2) production month month jan. feb. mar. apr. may. jun. jul. aug. sep. oct nov. dec. mark 1 2 3 4 5 6 7 8 9 a b c 9.2 detail of lot mark (1) below label is attached on the backside of the lcd module. see section 8.0: outline dimension. (2) the detail of lot mark is attached as below. (3) this is subject to change without prior notice. gp-hf hannstar hsd100ixn1 rev : - a** 6 a0 www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 24/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 10.0 package specification 10.1 packing form lcm model lcm qty. in the box inner box size (mm) notice HSD100IXN1-A 60 pcs/box ref.538 x 302 x 417 h 10.2 packing assembly drawings material notice box corrugated paper board (ab flute) partition/pad corrugated paper board (b flute) corner pad corrugated paper board (ab flute) esd bag pe www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 25/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 11.0 general precaution 11.1 use restriction this product is not authorized for use in life supp orting systems, aircraft navigation control systems, military systems and any other applicatio n where performance failure could be life-threatening or otherwise catastrophic. 11.2 disassembling or modification do not disassemble or modify the module. it may da mage sensitive parts inside lcd module, and may cause scratches or dust on the dis play. hannstar does not warrant the module, if customers disassemble or modify the mod ule. 11.3 breakage of lcd panel 11.3.1.if lcd panel is broken and liquid crystal sp ills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with ski n. 11.3.2. if liquid crystal contacts mouth or eyes, r inse out with water immediately. 11.3.3. if liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water. 11.3.4. handle carefully with chips of glass that m ay cause injury, when the glass is broken. 11.4 electric shock 11.4.1. disconnect power supply before handling lcd module. 11.4.2. do not pull or fold the led cable. 11.4.3. do not touch the parts inside lcd modules a nd the fluorescent leds connector or cables in order to prevent electric shock. 11.5 absolute maximum ratings and power protection circuit 11.5.1. do not exceed the absolute maximum rating v alues, such as the supply voltage variation, input voltage variation, variation in pa rts parameters, environmental temperature, etc., otherwise lcd module may be dama ged. 11.5.2. please do not leave lcd module in the envir onment of high humidity and high temperature for a long time. 11.5.3. its recommended to employ protection circu it for power supply. 11.6 operation 11.6.1 do not touch, push or rub the polarizer with anything harder than hb pencil lead. 11.6.2 use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the lcd module for incoming inspection or as sembly. 11.6.3 when the surface is dusty, please wipe gentl y with absorbent cotton or other soft material. www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 26/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 11.6.4 wipe off saliva or water drops as soon as po ssible. if saliva or water drops contact with polarizer for a long time, they may ca uses deformation or color fading. 11.6.5 when cleaning the adhesives, please use abso rbent cotton wetted with a little petroleum benzine or other adequate solvent. 11.7 mechanism please mount lcd module by using mounting holes arr anged in four corners tightly. 11.8 static electricity 11.8.1 protection film must remove very slowly from the surface of lcd module to prevent from electrostatic occurrence. 11.8.2 because lcd module use cmos-ic on circuit bo ard and tft-lcd panel, it is very weak to electrostatic discharge. please be car eful with electrostatic discharge. persons who handle the module should be grounded through adequate methods. 11.9 strong light exposure the module shall not be exposed under strong light such as direct sunlight. otherwise, display characteristics may be changed. 11.10 disposal when disposing lcd module, obey the local environm ental regulations. www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 27/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. HSD100IXN1-A10 3.1 optical specification item symbol condition min. typ. max. unit note contrast cr 480 600 (1)(2) rising t r 2.4 4.8 response time falling t f 5.6 11.2 msec (1)(3) white luminance (center) y l 200 250 cd/m 2 (1)(4) (i l =120ma) color gamut s 60 % w x 0.280 0.310 0.340 white w y 0.300 0.330 0.360 rx 0.579 0.609 0.639 red ry 0.326 0.356 0.386 gx 0.289 0.319 0.349 green gy 0.557 0.587 0.617 bx 0.124 0.154 0.184 color chromaticity (cie1931) blue by =0 normal viewing angle 0.056 0.086 0.116 l 65 75 hor. r 65 75 u 50 60 viewing angle ver. d cr>10 60 70 (1)(4) brightness uniformity b uni =0 70 % (5) optima view direction 6 o clock (6) www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 28/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 5.3 tft lcd module cn (input signal): 60pin, 0.5mm pitch, 106c60-102000- g2-r (starconn or equivalent) pin no. signal description 1 pol polarity setting 2 stvd vertical line start pulse i/o signal 3 oe123r vertical line output enable signal 4 g-clkr vertical line clock 5 stvu vertical line start pulse i/o signal 6 gnd digital power ground 7 edgsel define clock edge select input, default edgsel=l. edgsel=l latch data by rising edge of clock edgsel=h latch data by rising and falling edges of clock 8 vcc digital voltage input 9 v9 gamma voltage input 10 vgl gate off voltage 11 v2 gamma voltage input 12 vgh gate on voltage 13 v6 gamma voltage input 14 udc shift up/down control signal udc = "h", up shift: stvd (input) g1 ~ g600 stvu (output) udc= "l", down shift: stvu (input) g600~g1 stvd (output) 15 vcom common voltage 16 agnd analog power ground 17 avdd analog voltage input 18 v14 gamma voltage input 19 v11 gamma voltage input 20 v8 gamma voltage input 21 v5 gamma voltage input 22 v3 gamma voltage input 23 gnd digital power ground 24 r5 red data bus input (msb) 25 r4 red data bus input 26 r3 red data bus input 27 r2 red data bus input 28 r1 red data bus input 29 r0 red data bus input (lsb) 30 gnd digital power ground www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 29/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. pin no. signal description 31 gnd digital power ground 32 g5 green data bus input (msb) 33 g4 green data bus input 34 g3 green data bus input 35 g2 green data bus input 36 g1 green data bus input 37 g0 green data bus input (lsb) 38 dio2_cof3 horizontal line start pulse i/o signal (sthr) 39 rev data invert signal 40 gnd digital power ground 41 clk pixel clock 42 vcc digital voltage input 43 dio1_cof1 horizontal line start pulse i/o signal (sthl) 44 ld polarity latch and re-flash new data to outpu t 45 b5 blue data bus input (msb) 46 b4 blue data bus input 47 b3 blue data bus input 48 b2 blue data bus input 49 b1 blue data bus input 50 b0 blue data bus input (lsb) 51 lrc select left or right shift, normally pulled high. shl=1: dio1 out1,2,3 out4,5,6 out1198,1199,1200 = dio2 shl=0: dio1= out1,2,3 ? out4,5,6 ? out1198,1199,1200 ? dio2 52 v1 gamma voltage input 53 v4 gamma voltage input 54 v7 gamma voltage input 55 v10 gamma voltage input 56 v12 gamma voltage input 57 v13 gamma voltage input 58 avdd analog voltage input 59 agnd analog power ground 60 vcom common voltage 6.6 back-light unit the back-light system is an edge-lighting type with 33 led. the characteristics of the led are shown in the fol lowing tables. item symbol min. typ. max. unit note led current i l 220 ma (2) led voltage v l 10.5 11 v operating led life time hr 20000 hour (1)(2) www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 30/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. source driver timing item symbol min. typ. max. unit note clk frequency fclk 48 56 60 mhz frame rate at 60hz clk pulse width tcw 6 - - ns - data set-up time tsu 4 - - ns - data hold time thd 2 - - ns - propagation delay of dio2/1 tphl 6 10 15 ns cl=25pf ( output ) time that the last data to ld tld 1 - - tcph - pulse width of ld twld 2 - - tcph - time that ld to dio1/2 tlds 5 - - tcph - pol set-up time tpsu 6 - - ns pol to ld pol hold time tphd 6 ns pol to ld gate driver timing item symbol min. typ. max. unit note cpv period tcpv 5 - - us - cpv pulse width tcpvh, tcpvl 2.5 - - us 50% duty cycle oe pulse width twoe 1 - - us - data setup time tsu 200 - - ns - data hold time thd 300 - - ns - www.datasheet.net/ datasheet pdf - http://www..co.kr/
h a n n sta r di sp l a y c o rp . document title hsd100ixn1 formal standard specifica tion page no. 31/31 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 8.1 outline dimension www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of HSD100IXN1-A

	To Download HSD100IXN1-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .